Welding the side step

The past few days I welded the first step.
First on the outside corner.

 Then after some more tacks the inner corner

 And then finally the both front and rear edge.

 The first step is now laid aside. And we started hacking up the plate for the other side.

 After all the pieces are cut out I made some bends with the metal break and rolled the edges with the bead roller.

 And then everything is tacked together.

 Today I made the edges on the front and back.

I'm now ready to put in some more tacks before I can start to weld. But my Argon bottle has just gone empty and the store from whom I'm getting my supplies is closed until Tuesday.
So this will be the end for this week.